RearviewSafety RVS-CW-CAM - Manual (Page 10)

REAR VIEW SAFETY
10
Pairing
1. Press MENU on monitor and it will bring you to
“camera settings” screen. (see screen 1)
2. Press MENU 2 nd time you will see “pairing” option. (see screen 2)
3. Press MENU 3 rd time and camera 1 is selected. (see screen 2)
Select camera 2 (Back-up camera), using the up/down arrow.
4. Remove screw from back of the camera to reveal “Pair Button”
(See diagram page 12).
5. Press MENU a 4
th
time to begin pairing process. During pairing
mode, hold the “Pair button” the the back of the camera for 5 full
seconds then push the “Pair button” on the back of the camera
(see diagram page 12). The button must be pressed within 5 sec-
onds of starting the pairing process, so for the greatest ease the
pairing process should be done BEFORE the camera is installed on
your vehhilce.You will see “Pair OK” on the screen when it suc-
cessfully pairs. If you see “Time out”, please repeat all steps.
Screen 1
Screen 2