Rega Apollo-R - Manual (Page 10)

Once playing the CD you can then activate the Pause function by pressing the pause
button on the remote or pressing play/pause button on the front panel.
Pause will then hold track position until the play button is pressed on either the
remote or front panel.
Once play is activated again the display shows all information about the track and will
continue to play from held position.
STOPPING THE PLAYER
Pressing the stop button on either the remote or front panel will stop the current
action and return the player back to track 1 of album 1.
Whilst in ‘stopping mode’ the player locks out all other functions.
TRACK PREVIOUS
When pressed while the disc is playing, the current track will start again from the
beginning.
Pressing again in quick succession will take you to the start of the previous track.
TRACK NEXT
Pressing once while the disc is playing, the next track will start from the beginning.
Pressing again takes you to the beginning of the next track after that, etc.......
If the TRACK buttons are pressed in pause and stop modes, a specific track can be
selected, and when the PLAY button is pressed the selected track will start from the
beginning.
9