Rega Saturn-R - Manual (Page 15)

CREATING A PROGRAM
The program function allows you to program up to 99 tracks from a disc or album in
any order you specify.
1) Press PROGRAM on the remote handset to create your new programme list:
PROGRAM will appear on the display.
2) When the first program location appears you can enter the required track
number. Continue this until your required playlist programme is complete.
3) Use the TRACK NEXT and TRACK PREVIOUS buttons to enter the track numbers.
Press the OK (Green) button twice after each track is selected.
4) If you enter the wrong track number it can be deleted by pressing CLEAR. This will
clear the last location entered. Press PROGRAM again to finish programming.
Pressing PLAY will activate your programme. The display now shows the first track
that was entered into your programme. If PROGRAM is pressed again you can enter
further tracks from the last location in your programme. This can be done either
when the Saturn-R is playing your programme or when stopped. To clear your
programme make sure the Saturn-R has stopped, then press the clear button.
NB: The program function does not work for mp3 or WMA files.
10