Rega Brio-R - Manual (Page 5)

3
The output amplifier is capable of driving awkward loads as low as 1.7Ω, below
this the amplifier is protected against shorted speakers and reactive loads.
The power supply uses a low noise generously rated toroidal transformer and
10,000µF smoothing capacitors that provide enough current to drive the most
awkward of loads.
We have avoided superfluous gadgets such as tone controls and headphone
sockets as they obstruct the signal path and degrade sound quality. The Rega
Ear (sold seperately) is a dedicated headphone amplifier designed specifically
for this purpose offering far greater performance than an in built socket.
The Brio- R is utilising the highest quality components and all of our
engineers’ experience to achieve the best sonic performance and ensuring it is
the most advanced and feature packed Brio to date.
INSTALLATION
The Brio- R will work well on most surfaces, such as a shelf or table,
provided there is sufficient air around the amplifier to prevent overheating. If
using a turntable, magnetic interference can be avoided by positioning the
amplifier as far away from the cartridge as the tonearm lead will allow. Never
stack other hi-fi equipment directly on top of the amplifier. The heat produced
by the Brio- R is dispersed to the air by the case itself. Ensure that the case
has an unobstructed air passage around it. Never place it directly on fabric or
carpets.
Brio-R manual:Cursa manual.qxd 08/04/2011 09:25 Page 5