Reizen RE-40 Amplified Telephone - Manual (Page 7)

7
TELEPHONE OPERATION
Making a Call
1. Pick up the Handset from the base.
2. Dial the desired number.
3. Hang up upon completion of the call.
Answering a Call
1. You will be alerted to an incoming call by both the ringer and the red ring flasher.
2. Pick up the Handset from the base and speak.
3. Hang up upon completion of the call.
Programming the Emergency Buttons
To save precious time in an emergency, store the
numbers of your local police, fire department and EMS
services on the Emergency Speed-Dial buttons (figure
4), so that you can automatically dial them.
1. Program these numbers by pressing the STORE button (figure 9, page 10), then the
Emergency Button.
2. Enter the phone number you wish to assign to the Emergency Button.
3. Press STORE again.
4. Repeat in turn for each emergency service.
NOTE: The keypad will not emit any tones while in memory store mode.
Using the Emergency Buttons
1. To call any of your three local emergency services, simply lift the handset or
press the speaker button.
2. Press the corresponding speed-dial button.
Figure 4