Roadi RDT45 - Manual (Page 3)

CHECK
OWNER S MANUAL
,
OBD2 CODE READER
3
1.Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the code
reader, read this instruction manual first and observe the following safety
precautions at a minimum whenever working on a vehicle:
1. Always perform automotive testing in a safe environment.
2. Wear safety eye protection that meets ANSI standards.
3. Keep clothing, hair, hands, tools, test equi pment, etc, away from all
moving or hot engine parts.
4. Operate the vehicle in a well-ventilated work area; Exhaust gases are
poisonous.
5. Put blocks on drive wheels and never leave vehicle unattended while
running tests.
6. Use extreme caution when working around the ignition coil, distributor
cap, ignition wires and spark plugs. These components create hazardous
voltages when the engine is running.
7. Put transmission in PARK (for automatic transmission) or NEUTRAL (for
manual transmission) and make sure the parking break is engaged.
8. Keep a fire extinguisher suitable for gasoline/Chemical/electrical fires
nearby.
9. Don t connect or disconnect any test equi pment with ignition on or
engine running.
10. Keep the code reader dry, clean and free from oil, water and grease.
Use a mild detergent on a clean cloth to clean the outside of the code
reader, when necessary.
2. Product Information
2.1 About the Code Reader