Samson 3-STRAND Class I Long Splice - Manual (Page 2)

© 2012 Samson Rope Technologies, Inc. All rights reserved. S/WD #108294 7/2012
PAGE 2 OF 2
SamsonRope.com | Email [email protected] | Tel +1.360.384.4669
3-Strand Class I Long Splice
S A M S O N S P L I C I N G I N S T R U C T I O N S
Tuck each strand 4 times. These tucks should be at
right angles to the direction of the twist in the rope.
5
step
6
step
The splice may be tapered by reducing each strand by 1/3, then 2/3
and performing another set of tucks for each strand for each reduction.
Now roll and pound well. Finally cut the strands off close to the rope.
f i n a l t u c k i n g
ta p e r i n g a n d f i n i s h i n g t h e s p l i c e
Marriage point
Finished splice
4 tucks
Tuck each strand 4 times
Tuck each strand 4 times
Tuck each strand 4 times
DOCUMENT 3Strand_C1_Long Splice_AUG2012.pdf