Samson 3-STRAND Class I Rope-to-Chain Splice - Manual (Page 2)

PAGE 2 OF 2
SamsonRope.com | Email [email protected] | Tel +1.360.384.4669
3-Strand Class I Rope-To-Chain Splice
S A M S O N S P L I C I N G I N S T R U C T I O N S
With Strands 1 and 3 tucked once, (Fig. C),
turn splice over to tuck Strand 2 (Fig. D).
F i n i s h i n g t h e s p L i c e
4
step
Figure c
Figure d
1
3
2
1
3
2
Perform 4 more complete tucks with
all 3 strands. Tighten tucks if necessary.
NOTE: This method of joining rope and chain is
designed to minimize chafe between rope and
chain, but as a matter of prudent seamanship,
the splice should be checked regularly and
remade if there is any evidence of wear.
5
step
Front of finished splice.
Back of finished splice.
DOCUMENT 3Strand_C1_Rope to Chain_AUG2012.pdf
© 2012 Samson Rope Technologies, Inc. All rights reserved. S/WD #108294 7/2012