Schiit Asgard 2 - Manual (Page 5)

SCH01-2A
000001
115VAC 30W
3 Gain Switch. Up is
hi gain (6X), down is
lo gain (1.5X). Use the
low-gain setting for
sensitive headphones
and IEMs, for lowest
noise floor.
4 On-Off Switch.
Up is on. Down is off.
Pretty easy. 1 RCA Inputs. This
is where you connect
your DAC, computer,
or other source. It uses
standard RCA cables.
2 Preamp Outputs.
Have powered
monitors or a speaker
amp you’d like to run?
Connect it to Asgard
2’s preamp outs here.
BACK PANEL
5 AC Input. Plug the
power cord in here.
Plug the other end into
a wall outlet of the
correct voltage. Trying
to run a 115V unit on
230V will result in a
blown fuse, no music,
and a void warranty. 6 Disclaimer. No,
seriously. Don’t take
this apart. Don’t stick
paperclips through the
holes on the top or
side. Do not randomly
loosen screws. Bad
things will happen. And
again, you’ll void your
warranty.
1
4
5
3
2
6
asgard 2 owner's manual 1.0.indd 5 1/3/13 9:45 AM