Schiit Mjolnir - Manual (Page 2)

THIS IS A BALANCED HEADPHONE AMP.
It requires balanced headphones.
USING adapters to connect unbalanced headphones will short two active
outputs together, and you will trigger the internal protection.
The following is required by the roughly 9,542 government agencies and regulations we have to comply with. If you have some common sense, they should seem pretty
straightforward. In any case, read these instructions before proceeding farther, follow all instructions, and heed all warnings. Or else!
1. If you don’t know how to install audio devices, get a qualified professional to help.
2. Never use this device near water, and clean only with a dry cloth.
3. Assure adequate ventilation, do not block any ventilation openings, or place near heat sources.
4. Use only the supplied power cord or suitable replacement. Route cords away from traffic areas and protect them from being pinched. Unplug the cord from the outlet if the apparatus
is unused for a long period of time.
5. To prevent electric shock, do not use the plug with an extension cord, receptacle, or outlet unless blades can be fully inserted.
6. Refer all servicing to qualified service personnel. Service is required when the device has been damaged, including cord or plug damage, liquid has been spilled or objects have fallen
into the device, the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE TO RAIN OR MOISTURE.
safety instructions
Application for Council Directives 72/23/EEC
Conformity declared for EN60065, EN50082-1