Schiit Wyrd - Manual (Page 2)

1 Connect Wyrd’s USB output to your USB DAC with a good USB cable, 2m or less in length, and
ensure that it is a true USB 2.0-rated cable.
2 Connect your USB source to Wyrd’s USB input with a cable that has the same specs as above.
3 Connect the supplied 6VAC wall-wart to Wyrd with the attached cord. Do not use different AC
adapters, no matter how fractally perfect, cryogenically treated, or quantum aligned they are. Most
wall-warts are DC output, and will not work with Wyrd. We are using linear rectification and some of
the lowest-noise regulators on the planet to ensure the lowest noise USB power.
4 Turn on the power and enjoy your music!
item
WyRd connections
OUTPUT
6VAC
16.200101
1
2
3
4
wyrd owner's manual.indd 2 4/10/14 2:38 PM