Cables Unlimited SPK-SHOWER - Manual (Page 4)

Transmitter Operation
1. Plug the included AC adapter into a standard wall outlet
2. Turn on the power switch on rear transmitter. A blue indicator flashes
when the AC adapter is plugged in. If the blue POWER indicator does
not illuminate, ensure the adapter is plugged in.
3. Insert the adapter connector plug firmly into the DC jack located at the
back of the transmitter
4. You can pull out a 3.5mm audio cable in front of the transmitter, which
you can connect it to the i-pod’s output jack. After used, just pull it for a
bit and release, then it will roll back automatically
5. The rubber surface of the transmitter is specially designed for you to lay
your I-pod on it to prevent sliding down
6. You can also connect the 3.5mm audio cable to the other end to the
output jack of any of your desired audio sources, like MP3, CD, DVD,
TV, Radio recorder, etc.
7. When an audio signal reaches the transmitter, the Blue indicator
illuminates steady. If the Blue indicator keeps flashing, ensure the audio
source is switched on
Speaker
Battery Operation
1. To operate the speaker using battery power, open the battery
compartment cover located at the rear of the speaker
2. Insert six AA size batteries (purchase separately) into the battery
compartment, observing proper +/- polarities as indicated
3. Replace the battery compartment cover