Sonex Jabiru 3300 Oil Cooler Upgrade Installation Instructions - Manual (Page 3)

AeroClassics Oil Cooler
3 Sonex Aircraft
LLC
© 2008 All Rights Reserved.
Materials List
The following materials will be needed to install the Aero-
Calssics oil cooler. This list is also organized by supplier on
the next page.
Important: Your particular installation may require items
not listed here. This is only a suggested list of the most
commonly needed parts.
Sonex Provided Parts
q SNX-P-20-44, Qty. 1, Oil Pan Baffle, Qty. 1
q 1” x 1” x 1/8” 6061-T6 Extrusion, 6” long, Qty. 2
q 2” x 2” x 1/8” 6061-T6 Extrusion, 6” long, Qty. 1
Oil Cooler Installation
In addition to the Sonex provided parts you will need:
q Oil Cooler, Aero-Classics 8000075
q Straight Hose Fitting, Size 06, Qty 3
Jeg's P/N 799-610020
q 90 O Hose Fitting, Size 06, Qty 1
Jeg's P/N 799-613160
q AN 816-6D, Straight Nipple, Qty. 2
q MS20822-6-6D, 06-3/8" to 3/8" 90 O Fitting, Qty. 2
q AN3-5A Bolt, Qty. 6
q AN960-1032 Washer, Qty. 12
q MS20365-1032 Stop Nut, Qty. 6
q MS21919-WDF8 Clamp, Qty. 1
q Baffle Seal
Miscellaneous
q Gasket sealer
q High-temp RTV
q Teflon paste
MATERIALS LIST
Materials Shopping List by Supplier
Important: Your particular installation may require items
not listed here. This is only a suggested list of the most
commonly needed parts.
Jeg's
1-800-345-4545
www.jegs.com
q Straight Hose Fitting, Size 06, Qty 3
P/N 799-610020
q 90 O Hose Fitting, Size 06, Qty 1
P/N 799-613160
q -06 Pro-Flex Hose, 6 feet
P/N 799-632060
Wicks:
1-800-221-9425
www.wicksaircraft.com
q Oil Cooler, Aero-Classics 8000075
q MS21919-WDF8 Clamp, Qty. 1
q MS20822-6-6D, 06-3/8" to 3/8" 90 O Fitting, Qty. 2
q AN816-6D Nipple, Qty. 2
q MS20365-1032 Stop Nut, Qty. 6
q AN960-1032 Washer, Qty. 12
q AN3-5A Bolt, Qty. 6
q Baffle Rubber (Cowl Seal), 1/8" x 3" x 9' Long
Wick's P/N SR3-1/8-ROLL