Sound Anchors ADJ2 - Manual (Page 3)

ASSEMBLY
1. Fasten the base to the uprights using 2 ea. 7/16-14 x 1 flathead socket cap screws as shown
in figure 1.
2. Install spikes washers and jam nuts into the four threaded holes in the stand base as shown
in figure 2. Insert the spikes so that there are 1 or 2 spike threads visible after the jam nuts are
set. JAM NUTS ARE FINGER TIGHTENED ONLY NO TOOLS.
3. Mount the “R” stalk platform assembly to the stand upright. Use 7/16-14 x 2 1/2 socket
head cap screw and 7/16 hardened as shown in figure 3
Figure 1
Figure 2
Figure 3