Clarion WXZ466MP - Manual (Page 21)

280-8171-00
WXZ466MP
21
English
Clearing titles
1. Play a track or tune in to a radio/TV station
for which you want to delete the title.
2. Do one of the following:
● In the CD or CD changer mode
Press the [TITLE] button to select “USER”.
● In the radio or TV mode
Skip this step.
3. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the title input dis-
play.
4. Press and hold the [BAND] button for 1 sec-
ond or longer to delete the title.
5. Press and hold the [SEARCH] knob for 2
seconds or longer to store the setting and
return to the previous mode.
Cellular telephone mute
This unit requires special wiring to mute the au-
dio signal automatically when a cellular tele-
phone rings in the car.
∗ This function is not compatible with all cellular tele-
phones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
AUX function
This system has an external input jack so you
can listen to audio from an external device con-
nected to this unit.
Common Operations
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer and
Radio/TV stations. The number of titles that can
be entered for each mode are as follows.
CD changer mode Number of titles
DCZ625 connected 100 titles
CDC655Tz connected 100 titles
Mode Number of titles
CD mode 50 titles
TV mode 20 titles
Radio mode 30 titles
1. Turn the [SOURCE] knob to select the mode
you want to enter a title (Radio, CD, CD
changer or TV).
2. Play a track or tune in to a radio/TV station
for which you want to enter the title.
3. Do one of the following:
● In the CD or CD changer mode
Press the [TITLE] button to select “USER”.
● In the radio or TV mode
Skip this step.
4. Press and hold the [TITLE] button for 1 sec-
ond or longer to switch to the title input dis-
play.
5. Turn the [SEARCH] knob to move the cursor.
6. Press the [BAND] button to select a charac-
ter. Each time you press the [BAND] button,
the character changes in the following order:
Capital letters ➜ Small letters ➜ Numbers
and Symbols ➜ Umlaut ➜ Capital let-
ters…
7. Turn the [A-MODE] knob to select the de-
sired character.
8. Repeat steps 5 to 7 to enter up to 10 charac-
ters for the title.
9. Press and hold the [SEARCH] knob for 2
seconds or longer to store the title into
memory and return to the previous mode.
+WXZ466MP-009-ENG 05.10.24, 10:32 21