CDA FWV900 - Manual (Page 5)

Use and Controls
FWV900
FWV900 control panel
To switch the power on/off
Press and hold the light and temperature set buttons simultaneously for five seconds.
To change the temperature
• Press the temperature set button once to select the upper zone.
• The LED display for the upper zone will flash.
• Press the up or down buttons until the required temperature is shown on the display.
• Press the temperature set button again to select the lower zone.
• The LED display for the lower zone will flash.
• The preset temperature for the upper zone is 10˚C / 50˚ F and for the lower zone is 16˚C / 60˚ F.
• To change the temperature display from Fahrenheit to Celsius, or Celsius to Fahrenheit, press and hold the button for
five seconds.
• To view the set temperature in either zone, touch the up or down button at any time and the set temperature will flash in
the LED display for five seconds.
Optimal temperature selection
Whilst wine is best stored at temperatures between 13 and 15˚ C, your wine can also be stored at drinking temperature, for red
wine this is between 15 and 17˚ C, and for white wine between 12 and 13˚ C.
To use the internal light
• Press the light button to switch the light on or off.
c
F
C/ F
3 4 1 2
Key:
1 – Light button
2 – Temperature set button
3 – Up button
4 – Down button
c
F
C/ F