Thermcraft XOV-21-21-19.5-1A-2-SL - Manual (Page 3)

RECEIVING AND INSPECTION
Your satisfaction and safety require a complete understanding of this unit.
Read the instructions thoroughly and be sure that all users are given
adequate training before attempting to use this unit. Note: This equipment
must be used only for its intended purpose; any alterations or modifications
will void your warranty.
1.1 Inspection: The carrier, when accepting shipment, also accepts
responsibility for safe delivery and is liable for loss or damage claims. On
delivery inspect for visible exterior damage, note and describe on the freight
bill any damage found and enter your claim on the form supplied by the
carrier.
1.2 Inspect for concealed loss or damage on the unit itself, both interior and
exterior. If any, the carrier will arrange for official inspection to substantiate
your claim.
1.3 Accessories: Verify that your accessory package is complete. All units
should have a set of four (4) Leveling feet, two (2) shelves and eight (8)
shelf clips.
1.4 Return Shipment: Save the shipping crate until you are sure all is well. If
for any reason you must return the unit, contact your customer service
representative for authorization and supply data plate information. Make
sure to include the model and unit serial number. The service
representatives will furnish you with a return authorization number and
address for return. Note: Make sure this return authorization number
appears on the unit packaging and shipping papers. Units returned without
proper authorization may not be accepted at the factory. For information
on where to contact Customer Service please see the manual cover.
Section
1