Trail Tech KICKSTAND 5302-00 - Manual

KICKSTAND INSTALLATION
2012-2014 KTM 125/150/250 SX
2011-2014 KTM 250/350 SX-F 2013-2014 KTM 450 SX-F
010-ELV-161
TRAIL TECH KICKSTANDS
Tech Support: 360-687-4530
[email protected]
STEP 1
STEP 2
STEP 3
Remove cotter pin and washer from left foot
peg pin. Rotate foot peg pin so cotter pin hole is
aligned vertically. If bike has plastic frame guard,
unbolt guard and slide upward out of the way.
(Figure 1)
Remove bolt from front lower chain guide. Leave
chain guide in place. Remove bolt from upper sub-
frame arm. (Figure 2)
1. Slide kickstand bracket ear between sub-frame
arm and bike frame. Slide kickstand bracket boss
onto foot peg pin.
2. Slide supplied cotter pin through small hole in
kickstand bracket boss and through foot peg pin
hole. Rotate foot peg pin as necessary to align
holes. (Figure 3)
Figure 1
Figure 2
Figure 3
1
2