Trail Tech KICKSTAND 5003-KTM User Manual

Kickstand installation, Yamaha

Advertising
background image

010-ELV-25_R4

TRAIL TECH KICKSTANDS

Tech Support: 360-687-4530

[email protected]

KICKSTAND INSTALLATION

HONDA | YAMAHA | KTM | KAWASAKI | SUZUKI

FOOTPEG BRACKET STYLE

HONDA CRF150R Standard

06-13 5102-00

HONDA CRF150R Expert

06-13

5103-00

HONDA CR 125R/250R

02-03

5001-CR

HONDA CR 125R/250R

04-07

5011-CR

HONDA CRF250R

04-09 5011-CR

HONDA CRF250R

10-13 5104-00

HONDA CRF450R

02-03 5001-CR

HONDA CRF450R

04-08 5011-CR

HONDA CRF450X

04-13 5011-CR

HONDA CRF250X

04-13 5011-CR

HONDA CRF450R

09-12 5104-00

YAMAHA YZF 250/450

06-09

5203-00

YAMAHA YZF 250/450

10-13

5204-00

• Use a T50 torx bit to remove stock footpeg hanger bracket.

KAWASAKI KX250F

07-08

5401-00

KAWASAKI KX250/450F

09-10 5402-00

KAWASAKI KX 450

07-09 5401-00

SUZUKI RMZ250

07-09

5501-00

SUZUKI RMZ450

06-07

5501-00

SUZUKI RMZ450

08-12

5502-00

Remove stock foot peg and hanger. Replace with new hanger and

re-attach stock foot peg. Hang spring as shown in photo. Use

thread locking compound on pivot bolt to ensure it does not loosen.

YAMAHA

YAMAHA YZF/WRF

98-04 5002-YZ/WR

YAMAHA YZ two-stroke 125/250

98-01 5002-YZ/WR

YAMAHA YZ two-stroke 125/250

02-04 5201-00

YAMAHA YZ two-stroke 125/250

05-13 5202-00

Attach mounting bracket to frame as shown to right

using provided bolts. Hang spring as shown to right.

Use thread locking compound on the pivot bolt to

ensure it does not back out.

Note: Bracket for

YZ125 and YZ250 ‘02 and up is different from one

shown to right, but installs the same way.

YAMAHA YZF 250/450

05 5400-00

Remove chain roller nut and bolt. Remove the

lower rear sub-frame bolt. Attach mounting bracket

to frame as shown to left using the new sub-frame

shoulder bolt, blue spacer, and M8x 75mm bolt.

Note in picture to left that spacer is installed behind

the top hole on mounting bracket. Hang spring as

shown to left.

Mount spring hanger tab as shown above for 5104-00 kits.

LIMITED WARRANTY

TRAIL TECH INC. WARRANTS TRAIL TECH KICKSTAND PRODUCTS TO BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USE AND IF PROPERLY

INSTALLED FOR A PERIOD OF SIX MONTHS FROM DATE OF PURCHASE. IF FOUND TO BE DEFECTIVE AS MENTIONED ABOVE, IT WILL BE REPLACED OR REPAIRED. THIS SHALL

CONSTITUTE THE SOLE REMEDY OF THE PURCHASER AND THE SOLE LIABILITY OF TRAIL TECH INC. TO THE EXTENT PERMITTED BY LAW, THE FOREGOING IS EXCLUSIVE AND

IN LIEU OF ALL OTHER WARRANTIES OR REPRESENTATIONS WHETHER EXPRESSED OR IMPLIED, INCLUDED ANY LIMITED WARRANTY OF MERCHANTABILITY OR FITNESS. IN

NO EVENT SHALL TRAIL TECH INC. BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES.

Advertising