Tri-Tronics 2003 Basic Training - Manual (Page 7)

T R I - T R O N I C S
I n t ro d u c t i o n
Finding the lowest intensity in your collar model
To perform the sensitivity test, you should start with the
lowest level of intensity and work up. How you achieve
the “lowest level of intensity” depends on your collar model.
Adjusting intensity generally includes two types of adjustment.
First, there is an adjustment to the basic intensity of the
collar, using variable contact points, plugs, or a rotary dial or
knob on the transmitter, depending on model. Second, there
are “low, medium, and high” levels of this basic intensity,
achieved with different transmitter buttons. If you aren’t sure
of your model’s features, check your Owner ’s Manual, or call
our Customer Service Department at 1-800-456-4343.
Test procedure
After setting your collar intensity at its lowest possible
level, wait until your dog is not paying attention to you
or to anything else. Then press the lowest possible
continuous stimulation button. Watch the dog’s expression.
You want to see him cock his ears, or quickly move his head.
He may have a quizzical expression on his face. This tells you
that the dog has felt the stimulation but is not overwhelmed
by it. If you see no reaction at all in the dog, increase the
intensity by one level and repeat the test. Work your way
up through the different intensities until you find the one
that makes your dog react as described. If your dog overreacts
(vocalizes) when you press the button, or starts to act worr i e d,
you have selected a position that’s probably too high for
introductory training.
Page 4 Basic Training With The Tri-Tronics Electronic Collar
When you test your dog’s physical sensitivity to
stimulation, he should not be distracted by anything
and you should not give him any command when you
press the button. If he is distracted or trying to obey
a command, you won’t be able to accurately “read” his
reactions to the mild stimulation.