Two Brothers Racing Polaris Ranger RZR900 - Manual

V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
IMPORTANT - PLEASE READ CAREFULLY
Warranty
two brothers racing products are intended for closed course competition purposes only, and therefore are sold “as is”
without warranty. two brothers racing specifically disclaims any warranties of merchantability or fitness for a particular
purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use
of these products or parts.
Installation Instructions
2011 Polaris
RangeR RZR 900 XP
V.A.L.E.™ Dual Full Exhaust System with M-7 Aluminum Canister
Part # 005-3090106DV
1. Make sure the quad is completely cool before starting the
installation. Make sure the quad is secure on a level surface
and the wheels are chocked to prevent the quad from rolling.
2. Remove the seats.
3. Tilt the panel forward behind the seats to access the
header pipes.
4. Remove exhaust pipe joint springs(2) above rear right
wheel.
5. Remove 6 header flange bolts and remove OEM header
system.
6. Remove muffler retaining springs(2) and remove OEM
muffler assembly.
We recommend that this performance part be installed by a qualified
motorcycle technician. If you have any doubts as to your ability to install this
performance part, please consult with your local motorcycle dealer. Read all
instructions first before starting installation. Make sure the motorcycle and
exhaust system are completely cool before starting the installation. Be sure
to save all stock components for possible use later.
**This product has not been tested with all available accessories and some
items may cause excessive heat. Excessive heat may cause damage to your
vehicle. Two Brothers Racing will not be responsible for damaged parts.