Two Brothers Racing Honda SH150i User Manual
Page 5
Advertising
ITBR001-261 www.twobros.com
2009-2010 Honda SH150i - 5
unplug
stock
location
Figure G
Figure H
Figure I
above plastic
cover
10. Unplug the black 4-pin connector from the O2 sensor as shown in Figure G.
11. Attach the connectors from the Juice Box Pro to the stock O2 sensor and wiring
harness as shown in Figure H.
12. Place one set of connectors in the stock location and the other set just above the
plastic cover as shown in Figure I.
13. To obtain the correct air/fuel ratio in the closed loop area it is required to block
the clean air injection hose. This hose is pointed out in Figure B.
14. Reinstall the plastic trunk and seat.
Advertising