Casio 160CR - Manual (Page 10)

8
6. For the Euro only
6-1. Press the following keys to define the main currency/print out currency of the subtotal.
6-2. Press the following keys to set the currency exchange rate against the Euro.
P3 appears in mode display
Setting the Euro
P3 appears in mode display
C o
XVXX o
Z p
o
Euro Status
(to end the setting)
(to end the setting)
Procedure Purpose
Euro status
(1) Main currency = Local, Print out subtotal = Local: ?
(2) Main currency = Euro, Print out subtotal = Euro :
Z
(3) Main currency = Local, Print out subtotal = Both: X
(4) Main currency = Euro, Print out subtotal = Both :
C
C o
Z>>> o
Z>MMC p
o
Decimal position Exchange rate
(up to 6 digits)
Example: (Exchange rate and decimal position)
Currency exchange rate = 1 Euro in local currency
1 Euro = 1.977 DM :
Z>MMC
1 Euro = 1957.77319 LIt : Z>BMMMX
Setting the
Australian GST
Procedure Purpose
For Australia only.
You can set some programmable options to suit the Australian GST by the following procedure.
1. Insert the PROGRAM key (marked “PGM”) and rotate to Z position.
2. Press the following keys to program.
?Z?ZX??Z op
If you want to cancel this operation, press
o
instead of
p
.
Procedure Purpose
For the Euro only.
You can restrict the registable currency to the Euro only by the following procedure.
1. Insert the PROGRAM key (marked “PGM”) and rotate to Z position.
2. Issue all reset report including periodic data.
3. Press the following keys to set.
?Z?MX??X op
If you want to cancel this operation, press
o
instead of
p
.
Restricting the
currency (Euro)
Part-1 QUICK START OPERATION