Two Brothers Racing Suzuki RMZ450 - Manual (Page 3)

ITBR001-225 www.twobros.com 2009-2010 Suzuki RMZ450 - 3
Figure A
Figure B
Figure C
8. Unplug the stock wiring harness from the injector as shown in Figure C.
9. Unplug the stock Throttle Position Sensor (TPS) connector as shown in Figure C.
The TPS connector is a grey 3-pin connector.
Juice Box Pro
harness
unplug
unplug
6. Continue to route the Juice Box Pro harness down the right side of the bike.
7. Route the harness to the inside of the frame and go towards the throttle body as
shown in Figure B.
1. Remove the seat.
2. Remove the fuel tank.
3. Remove the front number plate.
4. Using the supplied zip ties, secure the Juice Box Pro to the stock ECU as shown in
Figure A.
5. Route the wiring harness from the Juice Box Pro between the frame and the fork
tube on the right hand side of the bike.