Vermont Casting Gas Grill - Manual (Page 17)

17
Assembly Step 7 - Assemble Cooking Grids
1.
2.
3.
Set the Heat Tents into
the tub of the grill, one
each directly above each
burner. There are notches in
the shelf to keep the Heat Tents
in place. Make sure the slotted
ends of the Heat Tents are
towards the front of the grill.
Place the Cooking Grids on
the upper shelf of the grill
tub. One each above each
burner.
The feet of the Warming Rack rest in the
grooves on the side of the grill tub as
shown. The rack height is adjustable by
turning it upside down.
LOCATE THESE PARTS:
Heat Tents
(KG432 model: 4 pcs)
(KG540 model: 5 pcs) Cooking Grids
(KG432 model: 4 pcs)
(KG540 model: 5 pcs)
Warming Rack