Cabletron Systems 2208 - Manual (Page 55)

Accessing Local Management
2H22-08R SmartSwitch 2208 User’s Guide Page 5-11
5.4.2 Selecting Local Management Menu Screen Items
Select items on a menu screen by performing the following steps:
1. Use the arrow keys to highlight a menu item.
2. Press ENTER. The selected menu item displays on the screen.
5.4.3 Exiting Local Management Screens
There are two ways to exit the Local Management (LM) screens.
Using the Exit Command
To exit LM using the EXIT screen command, proceed as follows:
1. Use the arrow keys to highlight the EXIT command at the bottom of
the Local Management screen.
2. Press ENTER. The Local Management Password screen displays and
the session ends.
Using the RETURN Command
To exit LM using the RETURN command, proceed as follows:
1. Use the arrow keys to highlight the RETURN command at the bottom
of the Local Management screen.
2. Press ENTER. The previous screen in the Local Management
hierarchy displays.
3. Exit from Local Management by repeating steps 1 and 2 until the
Device Menu screen displays.
4. To end the LM session, use the arrow keys to highlight the RETURN
command at the bottom of the Device Menu screen.
5. Press ENTER. The Local Management Password screen displays and
the session ends.
NOTE
The user can also exit Local Management screens by pressing
ESC twice. This exit method does not warn about unsaved
changes and all unsaved changes are lost.