Cary Audio Design SLP 05 - Manual (Page 17)

SERVICE AND CARE
CARE AND CLEANING
Unplug the unit from the wall outlet before cleaning. Clean the cabinet housing and front panel of
the SLP 05 with a soft cloth and a glass cleaner (such as Windex). The frequency of cleaning will
vary based on the cleanliness of the environment and the number of hours the SLP 05 is
operated. Do not use solvents or harsh chemicals to clean the preamplifier. They may remove the
labels or lettering from the chassis. Avoid letting the component become dusty or wet. A ‘feather
duster’ type cleaner will also work well for cleaning the component when the unit is cool.
FACTORY SERVICE
Careful consideration has been given to the design of your SLP 05 to keep maintenance
problems to a minimum. Any problems or requests for service should be referred to our
Customer Service Department at 919.355.0010. Do not return the SLP 05 to the factory without
a return authorization number (RA) from the Customer Service Department. Refer to the next
section for details about returning equipment to Cary Audio Design.
Should the unit be lost or damaged in shipment, Cary Audio Design will assume no
responsibility if the shipping company refuses to pay for damage due to your improper packing
or lack of insurance. Please use the original shipping carton for shipping the player.
NON-WARRANTY REPAIRS
Cary Audio Design will provide repair service for its products charging on a time and expense
basis. Please call Cary Audio Design at 919.355.0010 for more information about out-of-
warranty service and repair fees.
WARNINGS
• Make no attempt to put the SLP 05 Preamplifier in service with the
chassis open - Contact with high voltages found in the unit can be fatal.
• Completely remove AC power plug from the wall and allow 30 minutes
for the high voltage capacitors to discharge through bleeder resistors
before attempting to clean the inside of the component.
CAUTIONS
• Never remove/insert AC plug when the unit is on or the AC power switch is
in the “ON” position.
16