Combi Flash EX 655 - Manual (Page 5)

- 5 -
Trade name and trademarks of Graco ® , Century ® , Evenflo ® and Cosco ® ® ® and Peg-Perego are the property of their respective owners and no endorse- ® ®
ment of or approval by them is intended or implied. All Combi Flash EX strollers are compatible with specified models of the Graco ® , Century ® ,
Evenflo ®, and the Peg-Perego ® infant car seat/carrier models ® ® as of the date this printing was prepared.
Copyright May 2005 Combi USA Inc.
Attaching/Releasing Infant Seat
1. Unbuckle the attachment strap and lay over the right
and left side of the stroller frame.
2. Hook the infant seat onto front rail of the stroller. The
foot end of infant car seat/carrier will rest on the two
L-shaped brackets.
Remove the infant car seat/carrier by reversing the
above steps. See your infant car seat manufacturer's
instructions for proper release lever operation.
REMOVING THE INFANT SEAT/CARRIER
3. Bring the infant seat attachment straps through the
seat belt guides in the infant car seat/carrier and fas-
ten the buckle. To loosen, tilt the buckle and pull up.
To tighen, pull the strap.
Note: Illustrations are for reference only and may not represent
the actual product.
WARNING
Never use this product without securing the attachment
strap to the infant seat.
WARNING
The infant harness must be buckled correctly per your
manufacturer's instructions.
Combi Tyro, Combi Connection, Graco Snugride, Evenflo.
Portabout, Peg-Perego
WARNING
Make sure you tighten the attachment strap before usage.
1
2
3