Troubleshooting, Problem, Cause/remedy – Sony BKM-FW50 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting
Before requesting service, please check the following points. If the problem persists, contact
your local Sony dealer.
Problem
Cause/Remedy
Cannot connect to network.
BKM~FW50 is not correctly installed in
display.
—► Push the BKM-FW50 fully into the slot,
and tighten the fastening screws.
Cable is not connected correctly to network
port.
Plug the cable firmly into the network port.
Network settings are incoirect.
► When using a web browser from the
computer, check the network settings of the
computer.
Press and hold the RESET button of the
BKM-FW50 for at least 3 seconds to return
the unit to the default condition. Then
perform setup again.
Cable type is incorrect.
—>
Select a straight cable or a cross-wired
cable, as required by the network
environment.
Storage medium is not recognized.
The storage medium is broken.
—► Try using a different storage medium.
The storage medium being used is not
compatible.
—► Try using a storage medium from another
maker.
Cannot playback files saved on
the storage medium.
The file foraiats are incorrect.
Change the files to the appropriate format.
There are over 1,000 files saved on the storage
medium.
—► Remove files until the number of files does
not exceed 1,000.
There is a file exceeding 2 GB in size.
—► Make sure no file exceeds 2 GB in size.
The storage medium is broken.
—► Try using a different storage medium.
22 Troubleshooting