Using the menu, f (+)/4^(~), and ok buttons, 1 display the main menu, 2 select the menu you want to adjust – Sony SDM-N50 User Manual

Page 12: 3 adjust the menu, Close the menu, Adjusting the contrast (contrast, 1 press the 3 (contrast) button, Adjusting the black level of an image (brightness), 1 press the ice (brightness) button, If the screen is too bright

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

■ Using the MENU, f (+)/4^(~), and OK buttons

1 Display the main menu.

Press the MENU button to display the main menu on your
screen.

MENU

2 Select the menu you want to adjust.

Press the ♦(+)/■!'(-) buttons to display the desired menu.
Press the OK button to select the menu item.

INPUT

+

3 Adjust the menu.

Press the '♦^(+)/4'(-) buttons to make the adjustment. Then
press the OK button to return to the previous menu.

+

INPUT

Close the menu.
Press the MENU button once to return to normal viewing. If
no buttons are pressed, the menu closes automatically after
about 30 seconds.

MENU

■ Resetting the adjustments

You can reset the adjustments using the RESET menu. See
page 15 for more information on resetting the adjustments.

Adjusting the contrast (CONTRAST]

Contrast adjustment is made using a separate CONTRAST menu
from the main menu (page 11). This setting is stored in memory
for the signal from the currently selected input connector.

1 Press the 3 (contrast) button.

The CONTRAST menu appears on the screen.

CONTRAST

o

I miiimiiwim.

4 8 . 4 k H z /

6 0 H z

r

Horizontal frequency Vertical frequency of

of the current input

the current input

signal

signal

Displaying the current input signal
The horizontal and vertical frequencies of the current input signal are
displayed in the CONTRAST and BRIGHTNESS menu.

2 Press the ♦(+)/♦(-) buttons to adjust the contrast.

The menu automatically disappears after about 3 seconds.

Adjusting the black level of an
Image (BRIGHTNESS)

Brightness adjustment is made using a separate BRIGHTNESS
menu from the main menu (page 11). This setting is stored in
memory for the signal from the currently selected input
connector.

1 Press the iCE (brightness) button.

The BRIGHTNESS menu appears on the screen.

Horizontal frequency

Vertical frequency of

of the current input

the current input

signal

signal

2 Press the ♦(+)/'!■(-) buttons to adjust the

brightness.

If the screen is too bright

Adjust the backlight. For more information about adjusting the
backlight see “Adjusting the backlight” on page 16.

The menu automatically disappears after about 3 seconds.

Note
You can adjust neither contrast nor brightness when displaying the mail
menu on the screen.

12

Advertising