Setting up tv channels and on-screen remote, A. setting up tv channels, B. setting up ir blaster – Sony LF-X5 User Manual
Page 5: Quick start guide for, Locacionfrectu
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
® Setting up TV Channels
and On-screen Remote
Quick Start Guide for
^locacionfrecTU
A. Setting up TV channels
1. Remove stylus, then touch anywhere on the screen.
(
lf
-
x
Q [-—
1 C
lf
-
xs
;)
2.
Select [Settin^J
at the bottom right
of the screen.
3. Select [TV/VxJeo]
— [Channel Settings]
-*^lect
[CaWe]
(ON]or[OFF].then
(Auto Program].
Scanning may lake
several minutes.
yuu LV*II
mSA
9 > P
^ o P wJMf
[CABCE^ ¿OFF! turn on STB power switch
and Ihen f AulD Frograml
4. When scartning compiled,
message ^Automatic chanr>el scan
has finished* appears.
Select OK and go back.
B. Setting up IR blaster
An IR blaster allows you to make LocationFreeTV remote
controlling other devices.
1. Cor>nect the IR blaster to the IR BLASTER port
on the base station.
^
D
IT#
2. Position the IR blaster above the infrared recetver
on the external device.
(do not remove the backing from the IR blaster yet)
3. After chocking the operation
(see C.). remove the backing
paper from the IR blaster and
place in a appropriate position.
(ES-