Sony MHC-RXD6AV - Manual (Page 21)

Press TAPE A ► or TAPE B ► (or
DECK A ► or DECK B ► on the
remote).
Press TAPE A ^ or TAPE B to play
the reverse side. (Press DECK A ► or
DECK B ► again on the remote to play
the reverse side.) The tape starts playing.
■ The deck stops automatically after repeating the
sequence five times.
•Relay play always follows the following sequence:
Deck A (front side). Deck A (reverse side). Deck B
(front side). Deck B (reverse side).
To Do this
Stop play Press ■.
Pause Press PAUSE (or II on the
remote). Press again to
resume play.
Fast-forward Press or
Rewind Press or
Remove the cassette Press—.
Adjust the volume Turn VOLUME (or press
VOL +/- on the remote).
Tips
• Pressing TAPE A or TAPE B when
the system is off automatically turns the system on
and starts tape playback if there is a tape in the
deck (One Touch Play).
• You can switch from another source to the tape
deck just by pressing TAPE A or TAPE B
(Automatic Source Selection).
I
Searching for the start of the
current or the next track (AMS)
During play, turn the jog dial to the same
direction as the or ► indicator to go
forward. "TAPE A (or TAPE B) »> +1"
appears. Turn to the opposite direction to go
back. "TAPE A (or TAPE B) «< -1" appears.
(Or press \ « or on the remote.)
Notes
The AMS function may not operate correctly under
the following circumstances:
- When the unrecorded space between songs is less
than 4 seconds long.
- If completely different information is recorded on
the left and right channels.
- When there are continuous sections of extremely
low level or low frequency sound (like those of a
baritone sax).
- When the unit is placed near a television. (In this
case, we recommend moving the unit farther away
from the television or turning off the television.)
m
M
A
o
5
o
3
M
24