General, Supplied accessories, Optional accessories – Sony MDS-302 User Manual
Page 28: Guide to the serial copy management system, Note, Additional information
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Additional Information
General
Power requirem ents
120V AC, 60 i 1/
Power consum ptio n
19 VV
Dim ensions (approx) (w/h/d)
430
X
97.3
X
292 mm (
17 x
3
’’/s x
I I
7/>
in.) incl.
projecting parts
Mass (approx)
3.5 kg (7 lbs I 1 i>/)
Supplied accessories
Audio connecting cords (2 phono plugs - 2 phoiK.)
plugs) (2)
Remote commander (remote) RM-D3M (1)
Sony SUM-3 (NS) batteries (2)
Optional accessories
Recordable MDs; MDVV-60 (60 min), MDW-74
(74 min)
Optical cable ; POC-15A
U.S. and toreign patents licensed from Dolby Laboratories
Licensing Corporation.
Design and specifications are subject to change without
notice.
Guide to the Serial Copy
Management System
This V!D recorder uses the Serial ( opy Mangement System
vvliich allows only a first-generation digital copy to be made ot
prerecorded software via the MD reerirder's digital input/
output jacks. .An outline of this system appears below:
1
You can record from digital program sources (CDs,
prerecorded MDs, and DAT equipment with a sampling
frequency ot 44.1 kHz) onto a reeordabk' MD via the MD
rea'rder's digital input jack. You cannot, hov\ ever, record
from the recorded MD onto another recordable MO via
the MD recorder's digital output jack.
CD player
DAT deck
MD recorder
Optical cable
Recording
Digital output jack
Digital input jack
MD recorder
A recordable MD
recorded through the
digital input jack
Playing
Digital
output jack
Optical cable
Digital
input jack
Recording
MD recorder
Line (analog)
output jacks
Audio connecting
cord
Line (analog)
input jacks
MD recorder
Note
There are no copy generation restrictions on recording
between two MD reconiers connected via their respective
analog input/output jacks.
28