To listen to non-preset radio stations, Recording from the radio, 1 press tuner/band to select the band you want – Sony DHC-MD500 User Manual
Page 16: 2 turn the jog dial to tune in a preset station
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To listen to non-preset radio
stations
Use manual or automatic tuning in step 2.
For manual tuning, press + or - repeatedly.
For automatic tuning, press and hold + or
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• When an FM program is noisy, press
STEREO/MONO so that "MONO" appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
Listening to the radio (continued)
Recording from the
radio
You can record the radio program on a tape
by calling up a preset station. You can use
TYPE 1 (normal) or TYPE II (Cr02) tapes. The
recording level is automatically adjusted.
l/(!)
(Power)
2
1 4
6
DOLBY NR
1
Press TUNER/BAND to select the
band you want.
2
Turn the jog dial to tune in a preset
station.
Turn counter
clockwise for
lower preset
numbers.
Turn clockwise
for higher
preset numbers.
Preset number Frequency
hr
M
Q
In , -, r,l
J I - I u
UH,
16