Sony CFD-350 - Manual (Page 23)

Troubleshooting
T3
fü
cc
O
>>
ro
û
U
(Z
Qi
a
<ü
Symptom Remedy
The power does not come on. Connect the AC power cord securely.
Make sure the batteries are inserted correctly.
You can't turn on the player using the remote
when you operate the player on batteries.
c There is no audio. Make sure the display window is displaying the
function you want to operate.
Adjust the volume.
Unplug the headphones when listening through
speakers.
The audio is weak or has poor
quality. Replace all the batteries with new ones if they
are weak.
Move the plaver away from the TV.
If you are using the remote while listening to
AM radio, noise mav be heard. This is
unavoidable.
The picture of your TV becomes
unstable. If you are listening to an FM program near the
TV with an indoor antenna, move the player
away from the TV.
The CD does not play/"no disc"
lights in the display even when a
CD is in place. Make sure that the disc compartment is closed.
Place the CD with the label surface up.
Clean the CD.
Take out the CD and leave the disc
compartment open for about an hour to dry
moisture condensation.
Make sure "CD" appears in the display.
The sound drops out. Reduce the volume.
Clean the CD, or replace it if the CD is badly
damaged
Place the player in a location free from
vibration.
The tape does not move when you
press an operation button. Close the cassette compartment securely.
The RFC • button does not
function/The tape does not play. Make sure the safety tab on the cassette is in
place.
The tape does not erase completely. Clean the erasing heads (see page 25).
Replace all the batteries with new ones if they
are weak.
continued
I
Additional Information 23