Connecting to a vcr – Sony KV-20S10 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting to a VCR
To connect the VCR to the TV, first check the model number of the TV
and select the appropriate connection diagram below. For details on
connection, see the instruction manual of the VCR. Before making the
connection, disconnect the AC power cords of equipment being used.
■ For KV-20S10l20S11l21RS10i21RS10C
(Rear of TV)
^ Antenna cable
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow) Video cable VMC-810S/
820S (not supplied)
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
I
For KV-13M10114R10114R10020M10I21R10I21R10C
To watch video tapes
Press the TV/VIDEO button until "VIDEO" appears on the screen.
■ For KV-MT1300I1460RIMT2000IST20SOI2180RI2190R5
1 On the TV: Preset channel 3 or 4, whichever is not used in your area, following the
instructions for adding channels in "Presetting channels" (page 13).
2 On the VCR; Set the channel to the same charmel as chosen above. Then begin
viewing the video tape.
8
Setting up
I