Sony RM-V8A - Manual (Page 4)

Brand Component Code No.
1 \l (SiMis) VCK 41, o.S, OS, M\ ?'7, 3o, ,3b, .32
T\' 02,03, 11,23, W, 12
M.ignax o\ \'CK 13, 11, 12, 10
T\' 11,12,13, 03. 43,47
TV/VCR Combo 11, 18, 47& 12, 13
Marantz VCK 17,30,40
Marta VCR 33
Memorex VCR 12,38
Minolta VCR 08, 07
Mitsubishi/MGA VCR 26, 27, 28, 29, 56, 57
TV 24, 03,12
Multitech VCR 28, 41,24
NEC VCR 17, 39, 40
TV 03,12
Olympic VCR 12, 11
Optimus VCR 27
Orion VCR 55
Panasonic VCR 09,10,11,12
TV 18,16,17,07,49
TV/VCR Combo 18& 11,12
Pentax VCR 08,07
Philco VCR 11,12
TV 11,13,03
Philips VCR 13,11,12
TV 11
Pioneer VCR 11
TV 37,18,19
Portland TV 03,08
Quasar VCR 11,12,09,10,06
TV 18,07, 48
TV/VCR Combo 18,48 & 12, 09,10
Radio Shack TV * 02,12, 24, 23
RCA/PROSCAN VCR 07,08,11,12,13,14,15,16
TV 02,03,04,05,06,07,08,44,45, 53
TV/VCR Combo 18& 11
Realistic VCR 12, 33, 31,38, 27,41
Sansui VCR 17
Singer VCR 18
Samsung VCR 25,16,24
TV 26,12,13,03
TV/VCR Combo 23, 27 & 24, 25, 29
Sanyo VCR 33,38
TV 25
Scott VCR 15,16, 24, 38, 26, 27, 28, 29
TV 23,12
Sharp VCR 30, 31
TV 14,13,15
Shintom VCR 18
Signature 2000 VCR 41,30
TV 14,09
Sylvania VCR 13,11,12,41
TV 11,12, 03
Symphonic v C r 41
TV 23, 39,40
TV/VCR Combo 23&41
Tashiro VCR 35
Tatung VCR 17,39,40
Brand Component Code No.
loac VCR 17. 39, 41.40
l ochnics VCR 12, n
Toshiba VCR 15, 14,52
r\' 19, 14
Videdi TV 31,03, 12
Wards VCR 30, 31, 38, 34, 35
TV 13,03,15,12
Yamaha VCR 33, 17, 39, 40
Zenith VCR 34
TV 09,10
Cable Box Codes
Brand Code No.
Hamlin/Regdl 22, 23, 24, 25, 26
]errold/G.I. 01, 02, 03, 04, 05, 06, 07, 08,18
Oak 27, 28, 29
Panasonic 19, 20, 21
Pioneer 14, 15
Scientific Atlanta 09,10,11
Tocom 16,17
Zenith 12,13
T roubleshooting
If you have problems setting up or using the Commander:
• When setting up the Commander, carefully go through the
procedures described in "Setting the Code." If the code that's
listed first for your component doesn't work, try all the codes for
your component - in the order in which they're listed. If all the
codes fail to work (or if your component is not listed in this
manual), try using the procedures in "Searching for the Correct
Code."
• Check that you're aiming the Commander directly at the
component, and that there are no obstructions between the
Commander and the component.
• Make sure the batteries you're using are not worn out, and that
they're inserted correctly.
• Check that the button of the TV, VCR, or CABLE is pressed to
choose your desired component.
• Check that the component has infrared remote capability. For
example, if your component didn't come with a remote
commander, it probably isn't capable of being controlled by a
remote commander.
For the customers in the U.S.A.
Customer Support Information
If - after you've read through this manual - you still cannot get the
Remote Commander to work properly, call the Sony Customer
Support Helpline at 1-800-822-2217.