Playing with the bank function, Setting the clock, I u.u – Sony CDX-65RF User Manual
Page 12: 2i'n, I n-n n
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing Selected Ti-acks on a Disc
Setting the Clock
CJT
5
/
□
I n-n n
I u.u
u
The clock has a 12-hour digital indication.
Press the LIST button for more than two seconds.
The system reenters the normal CD play mode.
Playing with the Bank Function
□
Each time the BANK button is pressed, the indication on the
display unit will change cyclically as follows:
I--------► No indication----------------- ► BANK------------------------^-BANK— —
(Normal CD play mode)
" /
i n
' “
If the “BANK" indication is on the display unit, only the tracks with
the PLAY settings will be played.
If the "BANK" indication is flashing on the display unit, only the
tracks with the 5K1I’ settings will be played.
Each lime you press the BANK button, the display on the display
unit will change to "BANK ON", "BANK INV" or "BANK OH-" for
a second before returning to the previous display.
22
Even when you play a disc with
the PLAY/SKIP settings, if the
"BANK" indication has not
come on the display unit, the
disc will not be played
according to the settings.
For example, set it to T0:08.
Turn the ignition key to the ON position.
Press the DSPL button for more than two seconds.
□
2i'n
r r '
I______
The indication starts flashing.
I button to set the hour digits.
(to go back) (to go forward)
n-n
I u.u u
t \ V - ^ -
Press the |
**
m
*
nu
button to set the minute digits.
(to go back) (to go forward)
JTi n-n
J U.U Ü
Press the DSPL button.
□
I n-n
n
I u - u u
Note
When (he I’OWEK Shl .lC I'
swilch on llie hiile.iw.iv miil is
S4.( lo Ih,- OH' ' posilioii, III.'
ckx'k display will not come on
the display unit even if the
ignition of your car is turned on
In such a case, pres.s the I’UWliK
switch of the display iinii and
play a disc. Then press the
liSFI. button of the remote
commander twice to have the
clock display on the display unit
and follow steps 2 to 4.
23