Note, Continued on next page 77 – Sony DSC-D700 User Manual
Page 77
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4
Press the EXECUTE button.
The WB FLASH menu is displayed.
5
Select “Flash Mode” using the A(UP)/T(DOWN)
buttons and press the EXECUTE button.
WB R_flSH
Flash Mode
HgHgggBB/ExterTal
Interval
Start
10 sec(3-10)
You can now set the flash mode.
O
Choose “Internal” (built-in flash) or “External”
(external flash) using the A(UP)/T(DOWN)
buttons and press the EXECUTE button.
Choose “Internal” to use the built-in flash or
“External” to use the external flash and press the
EXECUTE button.
7
If you chose “External” in step 6, select “Interval”
using the A(UP)/T(DOWN) buttons and press the
EXECUTE button.
You can choose the interval during which to have
the flash light.
Set an interval within the range of 3 to 10 seconds
(in one-second units) using the A(UP)/T(DOWN)
buttons and press the EXECUTE button.
;Note
When using an external flash, set the amount of
light for the flash before adjusting the white
balance to avoid extreme brightness or darkness
in your pictures.
8
Point the camera toward a completely white
subject until it completely fills the viewfinder.
continued on next page
77