Code, Enter – Sony KV-27V55 User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■Mima SLEEP
C3 a____________
TV/VBEO eUlENIini
TOWER
CD
œ
oj|y^ CAMsmyj^
operating a Cable Converter Box
Follow these instructions to set the manufactuter’s code which will enable you to
operate a connected cable converter box with the pre-programmed Remote
Commander.
EXAMPLE: Operate a connected Zenith cable converter box.
1
Set the CABLEBOX-TV selector to CABLEBOX.
CABLE
BOX..TV
• If more than one code number is listed, try entering them one by one until you come to
the correct code for your equipment.
• If you enter a new code number, the code number you previously entered at that setting is
erased.
• In some rare cases, your equipment may use a code that is not provided with this
Remote Commander and you may not be able to operate your cable converter box with
the supplied Remote Commander. In this case, use the equipment’s own remote control
unit.
While pressing CODE SET, press 6 and 8 (Zenith’s code number
-i
chart below) and ENTER
CODE
+
%
%
ENTER
Manufactures and Code Numbers (cable box)
JERROLO
60,61,62,63,64,65
PIONEER
69,70
SCIENTIFIC ATLANTA
66,67
TOCOM
71,72
ZENITH
68
If you press a wrong code or if the code has not been set, four short beeps sound. Repeat
step 2 to set the code.
RM-Y117
Chapters; Using Advanced Features
157