Sony SA-VA29 - Manual (Page 6)

Getting Started
STEP3 Connecting the rear speakers
Uso tlio supplied spe.iker eoi ds (10 m) to eoniieet the
lett iind right reur spenkers.
Insert the stripped w ires into the speaker
terminals.
striped wire to connect - to -). If the connections are
reversed (+ to -), the sound will lack bass.
For customers in Canada
Use only the supplied SS-SR171 Rear Speakers for
connection to the REAR SPEAKER terminal.
STEP 4 Connecting your TV
If the audio and video output terminals on your TV
and VCR are already connected, and your TV has
stereo AUDIO OUT jacks, you can start enjoying
surround sound simply by connecting the speaker
system to your TV as shown below.
Important
If your TV has an on/off switch for its internal speaker, set
this to off, and enjoy the sound from this speaker system. It
not, set the volume on your TV to minimum.
Front speaker (left)
If you use AUDIO OUT jacks marked VARIABLE
After making the connecticm as sliown aho\ e, turn up
the volume on the 1 \'. Use this speaker s\ stem's
\ ohime control for regular wdume adjustment.
Turning down the \ olume on the TV reduces the
AUDIO OUT signal lev el and mav cause a loss in
sound quality and/or activate the auto-power off
function (see page h).
For the best possible sound (or if your TV only has a
monaural AUDIO OUT jack, or no AUDIO OUT jacks)
Connect the speaker sy stem directly to your VCR or
cable box.
The following connections suppress noise from the TV
and let you enjoy high-quality sound.
1 Connect your VCR or cable box to the 1 IN jacks on
the front speaker (left).
2 Connect your TV to the 1 OUT jacks on the front
speaker (left).
TV Front speaker (left)
Do not connect any component other than youi TV to the
1 OUT jacks on the front speaker (left).