Sony CPD-200ES - Manual (Page 3)

Table of Contents
Introduction........................................................................... ’
Precautions ............................................................................ 3
Getting Started....................................................................... 4
Using Your Monitor...............................................................4
Adjustments........................c................................................... 5
Entering New Timings...........................................................8
Power Saving Eunction..........................................................8
Plug and Play ......................................................................... 8
Use of the Tilt-Swivel............................................................. 8
Damper Wire.......................................................................... 8
Specifications.......................................................................... 9
Troubleshooting..................................................................... 10
Introduction
Congratulations oti vour purchase of a Soiiy Multiscan
100ES/200ES!
This monitor incorporates o\’er 25 years of Sony experience
with Trinitron display technology, ensuring excellent
performance and outstanding reliability. The Multiscan
10()ES/200ES's wide scan range (30 - 70 kHz), together with
Digital Multiscan Technology, allows it to sync to any video
mode from standard VGA through VESA 1024 x 768 at 85
Hz.
In addition, its two factorv preset color modes and one user
adjustable color mode gi\ e vou unprecedented flexibilitv in
rpatching on-screen colors to hard copy printouts.
Furthermore, the Multiscan 100ES/200ES feature digital
controls, raster rotation, power sax'ing, low emissions, and
much more. All together, it delivers incredible performance
with the quality and support vou can expect from Sony.
Precautions
Installation
• Prevent internal heat build-up by allowing adequate air
circulation. Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains, draperies) that
may block the ventilation holes.
• Do not install the unit near heat sources such as radiators
or air ducts, nor in a place subject to direct sunlight,
excessive dust, mechanical vibration or shock.
• Do riot place the unit near equipment which generates
magnetism, such as a converter or high voltage power
lines.
Maintenance
• Clean the cabinet, glass panel and controls with a soft cloth
lightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, scouring powder or solvent,
such as alcohol or benzine.
• Do not rub, touch, or tap the surface of the screen with
sharp or abrasive items, like a ball point pen or a screw
driver. This type of contact may result in a scratched
picture tube.
Transportation
When you transport this monitor for repairing or shipping,
use the original carton box and packing materials.
Warning on Power Connection |>,
> Use the supplied power cord.
For the customers in U.S.A.
If you do not do this, this monitor will not conform to
mandatory FCC standards.
for 100 to 120 VAC for 220 to 240 V AC for 240 V only
* Before disconnecting the power cord, wait for at least
30 seconds after turning off the power switch to allow for
the discharging of static electricity on the CRT display
surface.
»After the power has been turned on, the CRT is
demagnetized for approximately 5 seconds. This generates
a strong magnetic field around the bezel which may affect
the data stored on magnetic tape or disks near the bezel.
Place such magnetic recording equipment and tapes/disks
at a distance from this unit.
The socket-outlet shall be installed near the equipment
and shall be easily accessible.