Use of a display stand, Connections – Sony CPD-9000 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USE OF A DISPLAY STAND
With the optional Sony SU-531 display stand, this unit
can be adjusted to be viewed at your desired angle
within 90® horizontally and 15® vertically.
For details, read the instructions of the display stand.
CONNECTIONS
Be sure to turn the power of the unit off before making
any connections.
CONNECTION WITH THE SONY SMC-70 or SMC-
70G MICROCOMPUTER
Rear of CPD-1201/9000
Set to
"ANALOG”.
Open panel.
o
to AC
power lnput|[
connector
to wall outlet
AC power cord
(supplied)
O Align the plug
with the receptacle.
OFix the inserted plug
with the screws.
Loosen 1
screws when
pulling the plug out.
SMF-502
color monitor cable
(optional)
J-
to RGB IN
Align and Insert until the plug clicks.
To disconnect the plug,
press the projections
on both sides and pull.
to RGB
MULTI OUT
(25-pin)