Getting started, Charging and installing the battery pack, Charging the battery pack – Sony CCD-TR23 User Manual
Page 6: Battery life, Ccd-tr23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
Charging and installing the Battery Pack
Before using your camcorder, you first need to charge and install the battery pack. To charge the battery
pack, use the supplied AC-V25A/V25B/V25C AC power adaptor.
Charging the Battery Pack
Charge the battery pack on a flat place without vibration.
(1)
Connect the AC power adaptor to a wall outlet.
(2)
Align the right side of the battery pack with the
line on the AC power adaptor, then slide the battery pack in the direction of the arrow.
(3)
Set the
selector to CHARGE. The POWER lamp (green) and the CHARGE lamp (orange) light up. Charging
begins.
When charging is completed, the CHARGE lamp goes out. Set the selector to the center position and
unplug the unit from the wall outlet. Then remove the battery pack and install it on the camcorder. To
stop charging, set the selector to the center position.
Battery pack
NP-55
(supplied)
NP-80
NP-80D
NP-77H
NP-66H
NP-6S
NP-60D
NP-C65
Charging time*
70
190
170
125
90
105
Approximate minutes to charge an empty pack using the AC-V25A/V25B/V25C (Lower temperatures
require a longer charging time.)
Battery Life
CCD-TR23
Battery pack
NP-55
NP-80
NP-80D
NP-77H NP-66H
NP-68
NP-60D NP-C65
Typical recording time”
30
90
85
60
45
50
Continuous recording time ”*65
170
165
120
85
95