Sony WM-D6C User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Outputs LINE OUT (stereo minijack)
x1
output level 0.25 V (less than
4.7 kilohms)
Headphones (stereo
minijack) xi
load impedance 8-300 ohms
Power output Headphones
30mW + 30mW (at io%
harmonic distortion)
load impedance 32 ohms
Battery life See page 4.
Power requirements
6
V dc, four batteries, size
AA (lEC designation R
6
)
External power input jack
(required power
6
V dc)
accepts Sony AC-D4HG AC
power adaptor (optional) for
use on 120 V ac 60 Hz or
Sony DCC-120A car battery
cord (optional) for use on
12 V car battery
Dimensions 181 x40 x95 mm (w/h/d)
(7‘/<Ives'SV
4
inches)
including projecting parts
Weight
Approx. 640g (1 lb 7oz)
including batteries
Supplied accessories
Stereo headphones (1)
Connecting cord (1)
Carrying case and shoulder
strap
(1
set)
Design and specifications subject to change
without notice.
OPTIONAL ACCESSORIES
AC power adaptor AC-D4HG
Car battery cord DCC-120A
Electret condenser stereo microphone
(with stero miniplug) ECM(^09A
Stereo headphones
MDR-94, MDR-CD550
Connecting cord
RK-G129HG (stereo minipiug to two phono
plugs)
RK-G136HG (stereo miniplug to stero
mini-plug)
Plug adaptor PC-239S (stereo miniplug to two
minijacks)
Continued trouble-free operation of any tape
recorder is dependent on the quality of the
cassettes used in conjunction with it. The
use of Sony cassettes is recommended for
high quality recording and trouble-free opera
tion.
Your dealer may not handle some of the
above listed optional accessories. Please ask
the dealer for detailed information about the
optional
accessories
available
in
your
country.
13