Sony CDP-C331 - Manual (Page 12)

ir«fc’JUL* ■! I I A . * L r f I
- Program Play
You can make a program by designating up to 32 steps in
the order you want them to be played. The unit will play
the disc according to your program. This function is very
convenient for recording on the cassette tape.
1 Press A to open the disc tray.
a
OPeN/CLOSE I
6
Place a disc with the label side up. To play more
than one disc, press DISC SKIP to turn the disc tray
and place up to 5 discs.
After placing discs, press A to close the disc tray
I DISC SKIP
^ Press PROGRAM so that “PROGRAM” appears on
the display.
I program H
Choose the disc.
If you program a whole disc, see “To program a
whole disc”.
Press 1« or repeatedly until the desired
selection is located.
I IKW I l>M I
^ Tok I time
i «
paoQaAai
■‘'i
?8 M
¡7-----
Current selection
6 Press PROGRAM after the desired selection has
been chosen.
15 ^ »
M»
'iil
The selection is stored, and the blinking number in
the window light up.
To program additional selections from the same
disc, repeat steps 5 and 6.
To program additional selections from another disc,
repeat steps 4,5 and 6.
• You can make a program for recording on the
both sides of the tape at one time by performing
step 1 to 6.
8 If you program the selections for side B, press II to
' ij t 3 i * 4 1 . » I
<■1 tte
O
ml *
Pause isa I
Total lime will return to “0.00”
A pause is counted as one programming step.
Program the selections for side B.
Repeat steps 4 to 7 (or 5 to 7).
10 Press ^ to start playback.
i> I
The selections for side A will start playback.
12