ClearSounds CLA7V2 - Manual (Page 7)

6 – ENGLISH 7 – ENGLISH
Making And Receiving Calls
place the wire around your neck and insert 1.
the round connector plug into the Neckloop
Quick Disconnect plug, forming a loop.
IMPORTANT: To have the Neckloop operate
Properly, you will need to be sure the
connection is double clicked.
Depending on the type of device you are
2.
connecting to, select the proper connectivity
cord and connect the CLA7v2 end to the
base of the CLA7v2 unit and the other
end into the 2.5mm or 3.5mm jack on the
device you are using.
Switch your hearing aid to “T” or “MT”
3.
mode.
press the “oN/oFF” button on the side of
4.
the CLA7v2 the LED light will turn green
indicating the neckloop is on.
Use your telephone or other device in
5.
the normal way (ie. making and receiving
calls). See the phone’s owner’s manual for
instruction.
Since the CLA7v2 has a built in microphone,
6.
you will not need to hold the phone to your
ear, but can use it in conjunction with a belt
clip. Simply keep the phone in your pocket
or place it on a stable surface.
CLA7v2_EN,ES,FR.indd 7 7/29/08 7:26:59 PM