Recording an audio source – Sony STR-D590 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
I
Chpater 3 Advanced Operations
I
Recording an Audio Source
Tape Dubbing
Note on recording
The settings of VOLUME, TONE, SURROUND and DBFB do
not have any effect on recording.
4, 3,1
Tape deck B or
DAT deck
(for playback)
'\ Insert the recorded tape into tape deck B (or the
DAT deck) and a blank tape into tape deck A.
2
Press TAPE to select the deck for playback.
3
Adjust the recording level of tape deck A.
4
Start the playback of the tape (or the DAT) in tape
deck B (or the DAT deck), and set tape deck A in
the recording mode.
Dubbing will start.
17
Advertising