Hooking up the speaker system, Steri, Step 2 – Sony SA-VA500 User Manual
Page 5: Connecting the front speakers, Connecting the center speaker, Getting started, Step 2 connecting the front speakers
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
Hooking Up the Speaker System
This section describes how to connect the speaker system to your TV and VCR.
I lie arrow
STERI
indicates signal flow.
STEP 2
Connecting the front speakers
Front speaker (right)
Front speaker (left)
R-Ch
SPEAKER
INPUT
R-cfi
SPEAKER
OUTPUT
Connecting the center speaker
Use the supplied 8-foot-2 V: inch (2.5 m) speaker cord
to connect the center speaker.
Insert the stripped wires into the speaker terminals.
Center speaker
Front speaker (left)
To disconnect a cord, hold down the release tab and
pull out the connector. Never pull the cord itself.
Be sure to connect matching speaker terminals (e.g., use the
solid-color wire to connect -r to
+,
and use the striped wire to
connect - to -). If the connections are reversed (+ to -), the
sound will lack bass.
(Continued)