Sony STR-D315 - Manual (Page 5)

Hooking Up the System
Notes on Connections
At first, this section describes about the connection with the other equipments, the antenna connection,
speaker connection and then the AC power connection.
• Do not connect the power cord to an AC outlet nor press the POWER switch before accomplishing all
other connections.
• The cable connectors should be fully inserted into the jacks. Loose connection may cause hum and
noise.
• Jacks and plugs of the connecting cord are color-coded as follows:
Red jacks and plugs: For the right channel of audio signals
White jacks and plugs: For the left channel of audio signals
Yellow jacks and plugs: For video signals
Connecting Equipment
The numbers correspond to the fb lowing details on page 6 and 7.
antenna
(D Front speaker
system (A speakers)
R L
R L
Front speaker
systinn (B speakers)
Receiver Other equipment
White White
L ,J;>- @ L
R ^
@ R
Red Red
Note
When using the LD player or VTR connected to the TV/LD
inputs, be sure to connect* the video output jack of these
equipments to the VIDEO or VIDEO 1 input jack of TV.
(To remotely control these equipments correctly.)